Unplug the power from your Roku device and wait approximately 5 seconds, then reconnect the power cable. Press and hold the pairing button inside the battery compartment of the remote for 3 seconds or until you see the pairing light on the remote begin to flash. Tip: If the light doesn't flash, repeat this step.
When your Roku device displays the home screen, reinsert the batteries in your remote. Press and hold the pairing button inside the battery compartment of your remote for 5 seconds or until you see the pairing light on the remote begin to flash. If the light does not flash, try again.
They may be related, since the white blinking light would indicate it's trying to connect to the network. But that's a secondary issue. Primary is, of course, the lack of output from the Roku to the TV.
Re: Blinking white light
Unplug all cables except the power cord, everything. Remove any MicroSD card you may have stuck in. This time when you reset hold the button in for a good 30 seconds Only the power cord should be in. Hold it in for 30 seconds.How to reset the Roku remote
- Remove the batteries from your Roku remote.
- Unplug the power cable from your Roku player, wait for 5 to 10 seconds, and plug it back in again.
- When you see the Roku's home screen on your TV, insert the batteries in the remote.
Assuming that you can still navigate your Roku's menus, you can factory reset it.
- Navigate to the Settings menu.
- Choose Advanced System Settings.
- Click Factory Reset.
- Enter the code on-screen.
- Locate the Reset button on your Roku.
- Hold down the reset button until the device actually resets.
Power off the Roku device by unplugging the power cable and allow it cool down for a while. Make sure that your Roku device is not placed any cabinet or enclosed spaces. Sometimes your device gets struck and shows sign of overheating which can be easily resolved by restarting your device.
If your Roku is frozen, you can perform a system restart by following these steps using your remote:
- Press the Home button 5 times.
- Press the Up arrow once.
- Press the Rewind button twice.
- Press the Fast Forward button twice.
- The restart will begin, though it may take a few seconds.
There are a number of reasons why a Roku device might have issues functioning properly. A newly installed channel app or a buggy software update might cause the device to freeze or run poorly. When your Roku isn't working quite right, it's probably time to restart it.
If your Roku is connected to the internet but the connection seems weak, open the settings menu on the Roku, and then go to "Network" and then "Check connection." The device will test the quality of the internet signal and its speed, letting you know if your issues may be caused by a poor connection.
You will want to remove the battery compartment cover and unplug your Roku player. Press and hold the A, B and black pairing button all at once until the LED light flashes. The LED should flash three more times to indicate that the remote is cleared. Reconnect the Roku player to power.
Stick flashes once each time you press a remote button, the problem is not with the remote. If you couldn't find what you need: Visit roku.com/support for more help. Stick to pair by removing the stick and plugging it back in.
Press the pairing button until the green light starts flashing. This will either be beside the button or at the front of the remote. If the 'remote pairing' screen appears on your TV, the remote is getting paired.
Here's how:
- Download and install the Roku app. The app is available for iOS and Android devices.
- Launch the Roku app on your device.
- Tap Remote. The remote on the mobile Roku app will allow you to control your device, much like the actual remote control.
- Connect to your Roku Device.
Press and hold the “Reset” button on the back or bottom of the device for about 20 seconds. Some models will require a paper clip to press the button. Continue to hold the”Reset” button, then remove the Power cord from the back of the unit. Release the”Reset” button, then plug all of the cords back into the device.
