The Kernel Security Check Failure can be caused by the installed software conflicts. In addition to that, if your computer has memory problems, virus infection, driver incompatibility or outdated issue, corrupted Windows system files and hard disk errors, you can get the stop code Kernel Security Check Failure.
In case of viruses, take the necessary action to remove them from your computer. Yes, kernel security check failure displays a BSoD, but don't get intimidated by it. This error happens due to many reasons like memory issues, viruses, driver incompatibilities, and hard disk failures.
In fact, the whole point of a BSoD is to protect your hardware. When Windows senses that something could cause real harm, it stops everything, resulting in the infamous Blue Screen of Death. Although a BSoD won't damage your hardware, it can ruin your day.
Follow these steps to open your BIOS menu and disable Cache Memory to test if the 0x0000007F appears afterwards:
- Restart your computer.
- Press F2 or Del key enter BIOS Setup. Notice the key guide in the top-right corner.
- Go to the Advanced menu.
- Select Cache Memory.
- Make sure it's Disabled.
- Press F10 to Save & Exit.
- Choose Yes.
Click Kernels from the top menu and you'll see your kernels. Just click the 'stop' button for the kernel you want to close.
Method 1: Use Windows Startup Repair
- Navigate to the Windows 10 Advanced Startup Options menu.
- Click Startup Repair.
- Complete step 1 from the previous method to get to Windows 10's Advanced Startup Options menu.
- Click System Restore.
- Select your username.
- Select a restore point from the menu and follow the prompts.
Blue screen, AKA Blue Screen of Death (BSOD) and Stop Error
- Restart or Power cycle your computer.
- Scan your computer for Malware and Viruses.
- Run Microsoft Fix IT.
- Check that the RAM is properly connected to the motherboard.
- Faulty Hard drive.
- Check if a newly installed Device causing Blue Screen of Death.
The Kernel-Power critical error is a system error that causes your system to crash. However, the Kernel-Power issue doesn't always indicate a power supply issue, rather an issue with your system hardware causing a power fault, and in turn, your system to crash.
Symptoms of a failing computer power supply
- Random computer crashes.
- Random blue screen crashes.
- Extra noise coming from the PC case.
- Recurring failure of PC components.
- PC won't start but your case fans spin.
Microsoft-windows-kernel-pnp-events. mui uses the MUI file extension, which is more specifically known as a Microsoft-Windows-Kernel-Pnp-Events Resources file. It is classified as a Win32 DLL (Executable application) file, created for Microsoft® Windows® Operating System by Microsoft.
The Answer
- Plug the power supply into the wall.
- Find the big 24-ish pin connector that connects to the motherboard.
- Connect the GREEN wire with the adjacent BLACK wire.
- The power supply's fan should start up. If it doesn't then it's dead.
- If the fan starts up, then it could be the motherboard that's dead.
If the monitor is flashing or displaying dots and lines when it shouldn't be, the computer may not be getting enough power from the power supply unit. The insufficient power can cause the CPU and graphics card to render screen displays inconsistently.
A DCOM error usually occurs when an application or service attempts to use DCOM but does not have the proper permissions. Most of the time, DCOM errors won't affect your system, other than clogging up your Event Viewer.
How to Factory Reset Windows 10
- Open Settings. Click the Start Menu and select the gear icon in the lower left to open up the Settings window.
- Choose Recovery Options. Click the Recovery tab and select Get started under Reset this PC.
- Save or Remove Files. At this point, you have two options.
- Reset Your Computer.
While there are many other things that can cause the “Blue Screen of Death,” if your power supply is failing, the “Blue Screen of Death” can occur randomly. Here are some signs that a power supply is bad or inadequate: An inadequate power supply can cause system instability such as no boot, random reboots, or hangs.
A blue screen error (also called a stop error) can occur if a problem causes your device to shut down or restart unexpectedly. You might see a blue screen with a message that your device ran into a problem and needs to restart.
Event ID 1074: System has been shutdown by a process/user.This event is written when an application causes the system to restart, or when the user initiates a restart or shutdown by clicking Start or pressing CTRL+ALT+DELETE, and then clicking Shut Down.
To figure out when your PC was last rebooted, you can simply open up Event Viewer, head into the Windows Logs -> System log, and then filter by Event ID 6006, which indicates that the event log service was shut down—one of the last things that happens before a reboot.
Fast Startup is designed to help your computer start up faster after you shut down your computer. When you shut down your computer, your computer actually enters a hibernation state instead of a full shutdown.
After your computer restarted, it should open into the BIOS menu automatically:
- Go to Advanced tab.
- Go to Performance.
- Look for a Overclocking option.
- Make sure it's disabled.
- If it's enabled, disable it.
- Save the settings and exit BIOS by hitting the F10 key. Choose Yes if you're asked to exit with saving the changes.
The best power supply for your PC build is the one that provides the right amount of wattage to all components simultaneously. Manually calculating this requires that you multiply the total amps of all components by the total volts of all components. The result is the total watts that your PC build requires.
How to fix service control manager error 7000
- Check the Event Viewer Log.
- Restart the Service.
- Adjust the Service Login Settings.
- Fix Event ID 7000 With the Group Policy Editor.
If you're using a Windows 10 PC, checking your RAM is easy. Just click on the Start menu, type "about," and press Enter when "About Your PC" appears. Scroll down, and under Device Specifications, you should see a line named "Installed RAM"—this will tell you how much you currently have.
Things to do first – Repair Blue Screen
- Right-click This PC.
- Go to Properties.
- On the left-hand side, click Advanced System Settings.
- Under Startup and Recovery, click Settings.
- Now, under System Failure, untick the checkbox that says Automatically restart.
- Click Ok to save and continue.
How to Fix an Unexpected Store Exception Error in Windows 10
- Check the Health of Your Hard Drive. The error often indicates that you're using a failing hard drive.
- Update Your Display Driver. Display drivers causing incompatibility issues can also trigger this error.
- Run System File Checker.
- Disable Your Antivirus.
- Turn Off Fast Startup.
The KERNEL_DATA_INPAGE_ERROR bug check has a value of 0x0000007A. This bug check indicates that the requested page of kernel data from the paging file could not be read into memory. Important.
To run the check disk utility from Computer (My Computer), follow these steps:
- Boot into Windows 10.
- Double-click on Computer (My Computer) to open it.
- Select the drive you want to run a check on, e.g. C:
- Right-click on the drive.
- Click Properties.
- Go to the Tools tab.
- Select Check, at the Error checking section.
How to use the SFC tool to repair system files:
- Open the Start menu.
- Type “cmd.”
- Right-click on the first result (Command Prompt) and select Run as administrator.
- Type “sfc /scannow” and hit enter.
- Wait for the process to finish and restart your computer.
