A Note about File Systems:Drives that are going to be used only under Ubuntu should be formatted using the ext3/ext4 file system (depending on which version of Ubuntu you use and whether you need Linux backwards compatibility).
1 Answer
- Use Ubuntu live disk to boot up.
- Select Install Ubuntu on hard disk.
- Keep on following the wizard.
- Select the Erase Ubuntu and reinstall option (the third option in the image).
Formatting Disk Partition with NTFS File System
- Run the mkfs command and specify the NTFS file system to format a disk: sudo mkfs -t ntfs /dev/sdb1.
- Next, verify the file system change using: lsblk -f.
- Locate the preferred partition and confirm that it uses the NFTS file system.
To return your usb to normal usb (no bootable), you have to:
- Press WINDOWS + E.
- Click on "This PC"
- Right click on your bootable USB.
- Click on "Format"
- Select the size of your usb from the combo-box on top.
- Select your format table (FAT32, NTSF)
- Click on "Format"
Accessing Hard Drive Data Using Ubuntu Live USB
- Insert the Ubuntu Live USB and start the computer.
- As the computer starts, enter the Boot Menu options.
- Select Onboard or USB from the boot options depending on the location of the Ubuntu Live USB.
- Once the installation screen loads, select Try Ubuntu.
Mounting USB Drive
- Create the mount point: sudo mkdir -p /media/usb.
- Assuming that the USB drive uses the /dev/sdd1 device you can mount it to /media/usb directory by typing: sudo mount /dev/sdd1 /media/usb.
You can format your drives using the Disks utility that comes installed with Ubuntu.
Resize a partition (optional).
- Right-click the partition you want to resize and select "Resize/Move."
- Drag the edges of the partition to create free space before or after it.
- Click "Resize/Move" to accept your changes.
You need to use the mount command. # Open a command-line terminal (select Applications > Accessories > Terminal), and then type the following command to mount /dev/sdb1 at /media/newhd/. You need to create a mount point using the mkdir command. This will be the location from which you will access the /dev/sdb1 drive.
How to Mount a SMB Share in Ubuntu
- Step 1: Install the CIFS Utils pkg. sudo apt-get install cifs-utils.
- Step 2: Create a mount point. sudo mkdir /mnt/local_share.
- Step 3: Mount the volume. sudo mount -t cifs //<vpsa_ip_address>/<export_share> /mnt/<local_share>
- Using NAS Access Control on the VPSA.
2 Answers
- Now you have to find which partition is the NTFS one by using: sudo fdisk -l.
- If your NTFS partition is for example /dev/sdb1 to mount it use: sudo mount -t ntfs -o nls=utf8,umask=0222 /dev/sdb1 /media/windows.
- To unmount simply do: sudo umount /media/windows.
How to Ubuntu
- Boot either a Ubuntu or GParted Live CD.
- Open GParted.
- Right-click on the partition you wish to shrink.
- Select Resize.
- Shrink or Delete the target partition (make sure you leave at least a couple of GB for an OS to play with, especially Windows, unless you're deleting it completely).
For anything with higher capability, XFS tends to be faster. In general, Ext3 or Ext4 is better if an application uses a single read/write thread and small files, while XFS shines when an application uses multiple read/write threads and bigger files.
Ubuntu is capable of reading and writing files stored on Windows formatted partitions. These partitions are normally formatted with NTFS, but are sometimes formatted with FAT32. You will also see FAT16 on other devices.
Formatting a disk does not erase the data on the disk, only the address tables. It makes it much more difficult to recover the files. For those who accidentally reformat a hard disk, being able to recover most or all the data that was on the disk is a good thing.
If you are planning to re-use the drive and it's working, a quick format is adequate since you are still the owner. If you believe the drive has problems, a full format is a good option to make sure no issues exist with the drive.
3 Answers
- Boot up into the Windows Installer.
- On the partitioning screen, press SHIFT + F10 to bring up a command prompt.
- Type diskpart to start the application.
- Type list disk to bring up the connected disks.
- The Hard Drive is often disk 0. Type select disk 0 .
- Type clean to wipe out the entire drive.
How to Format a Laptop or Computer (8 Steps)
- Backup your hard drive. CNET.
- Method of restoration.
- Insert the operating system disk into your CD/DVD drive.
- Wait for the CD to load.
- Wait for the installation to complete.
- Restart your computer.
- Installing a fresh system.
- Wait for the reformat to complete.
Fix 2.Use Windows Disk Management Utility
- Right-click the computer icon in Windows 7 or This PC in Windows 8/10/11 and select "Manage." On the pops up window, from the right pane go to "Storage" > "Disk Management."
- Now find the SD card or USB drive that shows unable to complete the format error.
How to install Windows on a SATA drive
- Insert the Windows disc into the CD-ROM / DVD drive/USB flash drive.
- Power down the computer.
- Mount and connect the Serial ATA hard drive.
- Power up the computer.
- Choose language and region and then to Install Operating System.
- Follow the on-screen prompts.
The largest difference between 2.5 and 3.5 inch hard drives is their size. Two and a half inch hard drives aren't just narrower. They're also shorter and thinner, which makes them popular for laptop computers while desktop business computers typically use 3.5 inch drives.
You cannot format a hard drive from BIOS. You can only change the boot order get your computer to check for an OS startup CD, DVD, or USB stick. If you want to format HDD without OS, you have to create a bootable USB flash drive or CD/DVD and boot from it to perform formatting.
