The Powerline AV 500 Adapter from Netgear is an exceptional way to use your home or office's power outlets to connect your Ethernet-enabled computer or entertainment devices to the Internet. With this adapter, you can connect HDTVs, Blu-ray players, DVRs, PCs, and game consoles.
Wi-Fi Protected Setup (WPS) is a feature supplied with many routers. It is designed to make the process of connecting to a secure wireless network from a computer or other device easier. IMPORTANT for Android TV™ models.
If you want to add additional Powerline adapters, press the Security button on the next adapter for 2 seconds, and then press the Security button on any additional adapters in your network for 2 seconds. The adapters retain security settings even if they are unplugged.
A powerline adapter requires two outlets, plugged into the mains of your home. The powerline adapters can connect wirelessly or wired to your router and send the signal through the electric wiring of your home, which allows it to travel further and remove the restriction of walls.
Look for NETGEAR wireless adapter folder then select the NETGEAR Smart Wizard.
- Click Start then go to All programs.
- NETGEAR Smart Wizard wireless utility should appear on your desktop screen.
- Click on the Networks Tab.
- Select the SSID of the wireless network that you want to connect, then hit the Connect button.
With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings.
Press and hold the Pair button of Powerline adapter A (in no particular definition; just pick one from your powerline adpaters as A, another as B) for 1 second, the Power LED will start flashing. Step 2: In 120 seconds, please press and hold the Pair button of adapter B for 1 second, the Power LED will start flashing.
Resetting Powerline Fast Ethernet Adapters
- Use a pin or any pointed object to press and hold the Reset button for 10 seconds.
- Check the LEDs of your Powerline adapter.
- Click the Linksys Powerline AV Utility icon.
- Click the Administrator tab.
- Click Restore.
What to do if your TP-Link Router is reset
- While the router is powered on, press and hold the WPS/Rest button on the back until the Power LED starts blinking.
- Or Log onto the Web Management Page of the router. Go to System Tools>Factory Defaults, Click Restore. The router will restore and reboot automatically.
Reset the router
With the router powered on, press and hold the RESET button on the back of the router for more than 10 seconds until the system LED starts to flash quickly. Then release the button and wait for the router to reboot to its factory default settings.How can I reset and restore the range extender to factory default settings?
- Press the reset button on the rear panel until the two Link Rate LED and Device to Extender blinks.
- Release the button.
- Wait for the extender to reboot.
- Log in with the default password.
- Another method is the software method.
To perform RESET to factory defaults, press the reset button for 3 SECONDS. Press the Simple Connect button of your HomePlug X for 10 SECONDS. After you release the button, the Power and the Ethernet LED will turn OFF and turn ON. Press the Simple Connect Button of HomePlug AV Y for TWO SECONDS.
If your Powerline adapters don't sync up automatically and the powerline light is off, you should try to re-pair them: Press the pair button on the Powerline transmitter for 2 seconds. Press and hold the pair button on the Powerline receiver until the power LED becomes solid amber.
To troubleshoot powerline adapters: Always check the status of the LED lights of the adapters. If you are adding new adapters to an existing and working powerline network, make sure that they are compatible so that the new adapters will be added successfully. Please check the NETGEAR website for the compatibility list.
Powerline adapters not working
- Check your internet. It's an obvious one, but check the internet is working in your house.
- Check your connections. Make sure one adapter is plugged into a wall socket next to your router.
- Check the lights. Make sure all the lights on both adapters are lit up.
- Reset your adapters.
- Change the cables.
- Further help.
If all circuit breakers are connected to the main switch then Powerline adapters can communicate across different circuits. Some factors that can impact on the performance of your Powerline network can include wiring quality, the signal path and other electrical devices that are being used on the same line.
Usually, TP-LINK powerline adapters have three LED lights: First one stands for power; Second one stands for powerline connection; Third one stands for Ethernet connection.
Yes you can run two or more separate logical powerline networks in your house. You just need to ensure that they have different network keys. Do this by pairing the devices separately.
Method 1: reset the adapter using the button on the devices
- Find the powerline adapter's reset button.
- Use the paperclip to press the reset button for at least 10 seconds until the lights flash.
- Wait until the LEDs on the adapter have stopped flashing.
- (Optional) Set up the powerline adapters again.
NETGEAR Powerline is the easiest way to extend your internet connection without running long wires. Just plug into any electrical outlet then plug into your existing network connection and you have a wired network using your electircal wiring. It's that easy!
