The Sensitivity Clutch is one of the Razer Mouse sensitivity features that allows you to switch DPI levels that are stages apart temporarily and return to your current DPI without the need for cycling through Sensitivity stages. In a normal set-up, stages increment on default by 800 DPI going to 16000 DPI.
If your mouse doesn't have accessible DPI buttons, simply launch the mouse and keyboard control center, select the mouse you wish to use, select the basic settings, locate the mouse's sensitivity setting, and make your adjustments accordingly. Most professional gamers use a DPI setting between 400 and 800.
In printing, DPI (dots per inch) refers to the output resolution of a printer or imagesetter, and PPI (pixels per inch) refers to the input resolution of a photograph or image. If it is labeled as 250 PPI, that is an instruction to the printer to print it at a size of 4 × 4 inches.
A good speed to start out at is about 1 inch of vertical mouse movement to move your cursor from the top to the bottom of the screen. To get this speed you would set your mouse DPI to the vertical resolution of your monitor. If you use a 1080p monitor 1200 DPI is a good setting to start at.
Best mouse at a glance
- The best mouse overall: Razer Deathadder Elite.
- The best wireless mouse:Logitech MX Master 3.
- The best gaming mouse: Steelseries Rival 710.
- The best budget mouse: Logitech G203 Prodigy.
- The best business mouse: Microsoft Intellimouse.
Higher DPI means higher resolution. Resolution is not “size”, but it's often confused with it because higher resolution images are often bigger, but that doesn't necessarily have to be the case. Print: 300dpi is standard, sometimes 150 is acceptable but never lower, you may go higher for some situations.
Best Razer Mouse in 2020
- Top Pick: Razer DeathAdder V2.
- Runner-up: Razer Basilisk V2.
- Best Wireless: Razer Viper Ultimate.
- Best Budget: Razer DeathAdder Elite.
- Best Ambidextrous: Razer Viper.
- Best for MMO's: Razer Naga Trinity.
It is very comfortable, and while the larger size may take some getting used to compared to a standard office mouse, it's well worth it. If there's one complaint about Razer's DeathAdder line, however, it's that you need to use Synapse, Razer's desktop software, to take full advantage of the device.
The best gaming mouse in 2020
- Logitech G502 Lightspeed Wireless. The best gaming mouse for those with capacious budgets.
- Razer Deathadder Elite. The best gaming mouse for shooters.
- Logitech G203 Prodigy.
- Corsair Ironclaw RGB.
- Razer Naga Trinity.
- Steelseries Sensei 310.
- Razer Viper Ultimate Wireless.
- Logitech MX Vertical.
The DeathAdder Elite is a fairly affordable gaming mouse with good overall specs. It has seven programmable buttons, two zones of Razer Chroma lighting, and an incredibly high maximum DPI of 16,000, though we don't believe the max DPI says much about a mouse.
Steps
- Open Start.
- Click.
- Click Devices.
- Click Mouse.
- Click Additional mouse options.
- Click Pointer Options.
- Adjust your mouse pointer's speed.
- Disable pointer precision to slow down the mouse.
Change mouse sensitivity (DPI) settings
If your mouse doesn't have DPI on-the-fly buttons, start Microsoft Mouse and Keyboard Center, select the mouse you are using, click basic settings, locate Sensitivity, make your changes.To
adjust the
DPI setting using
Razer Synapse: Open
Razer Synapse and click on your mouse.
You can adjust the DPI by using the Stage options:
- Toggle the “Sensitivity stages” switch on to enable the stages options.
- Stages can be edited to show 2 to 5 stages.
- Click on the desired stage level for your mouse sensitivity.
If Razer Synapse failed to start on your PC, the issue might be related to Razer device drivers. Thus, reinstalling both Razer device drivers and the Synapse software can fix the issue. Right-click the Start button and select the Device Manager to open the window in the snapshot directly below.
Default DPI stages are as follows: 800, 1800, 4500, 9000, and 16000. The DPI stages can be customized using Razer Synapse 3. Pull from the bottom of the side plate to remove it; and then replace it with another side plate of a different button configuration.
You can do basic changes to the DPI of your Razer mouse by using the DPI buttons behind the scroller. Once you have installed Razer Synapse or 3.0, more DPI options will be available.
USB Polling Rate is how frequent your computer checks for signal from the mouse. Many gaming mouses can set polling rate to a high number, such as 500 Hz, meaning, 500 times per second.
High-DPI mice are more useful if you have a higher-resolution monitor. If you're playing a game on a low-resolution 1366×768 laptop screen, you don't necessarily need that high DPI. In theory, if a mouse has 1000 DPI, then, if you move your mouse one inch (2.54 cm), the mouse cursor will move 1000 pixels.
First-person-shooter pro gamers often prefer low DPI, as low as 800 DPI. This way, you have very precise control of movement. Low-DPI gamers use a huge mouse pad.
It's not about sensitivity, it's about how the mouse tracks the surface. At 2000 DPI, the mouse will be able to track at very high sensitivities very accurately. Think of it as having higher FPS in a game. Sure you can turn around at the same rate with ANY video card, but if you have low FPS, the game will be choppy.
Pro gamers use low DPI because this gives them ultimate precision when aiming. Pro FPS players use huge mouse mats, and they use their whole forearm to move the mouse. This combined with a DPI of 400 – 800 gives them accurate aim.
Let's start with some basics: higher mouse DPI means that the cursor will move further with less physical movement from your hands. In terms of FPS games, your character will turn slower at low DPI numbers and faster at high DPI numbers.
Regardless of how high the DPI of the most ultimate mouse can be (over 6000), people still say that a good DPI for gaming is 400, 800 or 1600 DPI as their most common setting, with most gamers still using the lower dpi of between 400 and 800.
The higher a mouse's DPI, the farther the cursor on your screen will move when you move the mouse. A mouse with a higher DPI setting detects and reacts to smaller movements. A higher DPI isn't always better. When playing the game normally without a zoomed-in sniper rifle, this high DPI may be too sensitive.
The quick answer is that higher resolutions lead to better scans for reproducing your images. 600 DPI scans produce much larger files but help ensure every detail in your print is recorded in digital form. If you want files that are easier to work with, 300 DPI scans would be a better choice.
