Your device may not be paired correctly with the iBT230. Do so by making sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it "discoverable" by turning on Bluetooth mode (check in Options or Settings). Press and hold the Play/Pause/Pairing Button for 2 seconds.
Press and hold the Bluetooth Pairing Button for 2 seconds. 3. Select “iHome iBT39” on device to pair. Once the iBT39 is paired to a device, it will attempt to autolink when the unit is turned on and when the device is within range (about 33 feet).
Go to your iOS Device (iPhone/iPad).
- Tap “SETTINGS.”
- Choose the “Wi-Fi Network” you want to use for your SmartPlug.
- Scroll Down and Tap on the "iHOME SMARTPLUG xxxxxx."
- Tap "NEXT" on the top right.
- Tap "DONE" when the accessory has joined your chosen network.
Supports simple network setup and custom device naming using iHome Connect, a FREE app available on the App Store for iPad, iPhone, and iPod touch. Launch the app and connect to the speaker (with the included USB sync cable) and follow simple on-screen menus to configure Wi-Fi.
Control for AndroidThe iHome Control app is the perfect way to control your iHome SmartPlug right from your Android device, from virtually anywhere in the world from your Android phone or tablet.
An iHome allows you to charge an iPod or iPhone quicker than charging the device on a computer. Most iHomes have a clock and radio, and some include a CD player. It is easy to learn how to use an iHome and you can set it up, charge your iPod or iPhone and sync it in only a few minutes.
To do so, turn the unit ON and press the end of paperclip or similar into the reset port on the back of the unit for less than 2 seconds to reset it without clearing Bluetooth settings. The unit will reset and power back on. (If pressed for longer than 2 seconds, the unit will reset but will not power back on.)
Response from iHome:
- Ensure your iHome model # is compatible and follow the steps in this order.
- Make sure nothing is connected in the Bluetooth Settings on your phone/tablet.
- Restart your phone.
- Power on your iHome unit.
- Go to iHome Enhance App to connect to your iHome unit first.
Best answer: Yes, you can connect Android smart phones with this Bluetooth speaker.
It must be plugged into the wall at all times. The batteries are backup to keep the time in the event of a temporary power outage. The batteries are just for a back-up power for the clock.
Wake to Radio: Press the Alarm 1 Button to confirm radio mode selection. Press the /Presets Button to select an FM preset to wake to, or press the – or + Buttons to tune in a desired wake to station. Wake to Tone: Press the Alarm 1 Button to confirm tone mode selection.
Press the – or + Buttons to adjust to the current date. Press the Time Set Button to confirm the date and exit clock setting mode. 2 beeps will confirm clock setting is complete.
Press and hold the Sleep/Clock Adjust Button for 2 seconds until the clock display flashes and a beep sounds. 2. Press the - or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time.
The iBT297 cabinet will flash blue and red, a voice prompt will announce “PAIRING” and the Bluetooth icon and “PAIR” will flash on the display, indicating the iBT297 is in pairing mode. “iHome iBT297” should appear in your device's Bluetooth menu. Select “iHome iBT297” to connect it.
Press and hold the Bluetooth Pairing Button on the back of the unit for 2 seconds. The unit will beep and the Bluetooth icon will flash on the display, indicating the unit is in pairing mode. 3. “iHome iBT22” should appear in your device's menu.
The alarm can be turned off temporarily with the Snooze button, until the next day with the Power/Alarm Reset button, or cancelled completely by pressing the Alarm button twice. You have to double tap the alarm buttons to toggle on/off.
